The DXR-702 is a two-channel digital receiver with two isolated relay outputs designed for use with Linearís DX Format transmitters. This
receiver can be used in a variety of remote control applications. When the receiver detects a signal from a transmitter programmed into its
memory, the appropriate relay output activates. The relays have four optional output configurations. When the relays are set to latch, the
receiver outputs will follow the open/close door status sent from DXT-31 door/window transmitters.
In a typical installation, the
receiver is connected to an alarm control panel, door strike, camera, high current relay or some other devices. Transmitters are used to
activate or control the devices. The receiver should be mounted with the supplied mounting bracket indoors or outdoors inside a weather
resistant non-metallic housing.
The digital DX code format features over a million possible codes. The DX transmitters are precoded at
the factory to unique codes, so no field coding is required. For versatility, any transmitter can be programmed into any receiver channel.
Receivers must be programmed to the transmitterís code before system testing and operation. Up to 32 transmitters maximum can be programmed
into the receiver. The transmitters can be split in any number between the two receiver channels.
- 32 transmitter capacity
- RF activity indicator
- Quick-learn programming
- Operates on 11-17 VDC or 12-16 VAC power
- Two channels
- Low transmitter battery reporting
- DX format
- Two form "C" relay outputs
- One Amp contact rating @ 24 Volts AC/DC
- Selectable relay activation time
- Current consumption: 25 mA standby, 90 mA operating @ 12 VDC
- RF frequency: 315 MHz
- 5.5" W x 4.0" H x 1.25" D