The Model DXR-701 is a digital receiver with an isolated relay output designed for use with Linearís DX Format transmitters. This receiver
can be used in a variety of remote control applications. When the receiver detects a signal from a transmitter programmed into its memory,
the relay output activates. The relay has four optional output configurations.
In a typical installation, the receiver is connected to
an alarm control panel, door strike, camera, high current relay or some other device. A transmitter is used to activate or control the
device. The receiver should be mounted with the supplied mounting bracket indoors or outdoors inside a weather resistant non-metallic
The digital DX code format features over a million possible codes. The DX transmitters are precoded at the factory to unique
codes, so no field coding is required. Receivers must be programmed to the transmitterís code before system testing and operation. Up to 32
transmitters can be programmed into the receiverís memory. The memory is retained, even without power.
The unit can be powered from a
11-17 VDC or 12-16 VAC power source. The relayís normally open and normally closed contacts can switch up to 1 amp at 24 volts AC/DC.
- 32 transmitter capacity
- RF activity indicator
- Quick-learn programming
- Operates on 11-17 VDC or 12-16 VAC power
- One channel
- DX format
- One form "C" relay output
- One Amp contact rating @ 24 Volts AC/DC
- Selectable relay activation time
- Current consumption: 25 mA standby, 60 mA operating @ 12 VDC
- RF frequency: 315 MHz
- 5.5" W x 4.0" H x 1.25" D