1600 Series Barrier Gate Operators

Magnetic travel limits mean you'll never have to adjust a limit switch again!

Microprocessor control boards are designed and built In The USA and ensure a long lasting, trouble free system. Plug-in loop detectors simplify installation and wiring. Optional battery back-up system available. Advanced Features

Gate Tracker™ reporting output provides operator data to a companion DoorKing access control system (1815, 1817, 1818). Know how many times the operator has cycled, if a loop has failed, if an input is shorted, and more! Special circuits provide automatic sequencing with slide or swing gate operators in PAMS (Perimeter Access Management System) applications. Gear box rotates full 360º to use complete gear box. Motor and gear box are located at the bottom to avoid top heaviness.

APPLICATIONS
The 1602 operator is designed for traffic lanes up to 20-feet wide in low use commercial and industrial applications. This operator uses a counter-balanced three-piece wishbone style arm assembly. The 1602 operator is designed so that it can be mounted on either the left or right hand side of the roadway. The operator can be equipped with a DC convenience open package (optional) that will automatically raise the arm in the event of a power outage.

Model 1602 Technical data:

Electronic limit settings (no mechanical limit switches required).

ERD - Arm reverses during the down cycle if an obstruction is encountered.

Automatic timer is adjustable from 1 to 23 seconds. Two ports for plug-in loop detectors.

Gate Sequencing - Special inputs on the control board automatically sequence the barrier operator with a slide or swing gate operator.

Sequencing is typically used for better traffic control in high use applications such as gated communities and apartment complexes.

Gate Tracker™ reporting output sends gate operator data to a companion DoorKing access control system.

Optional Battery Back-Up drive system opens gate automatically, or on command, during power outages.

Optional heater kit and fan kit available.

SPEED: 90º in approximately 3 seconds

ADVANCED FEATURES

Magnetic limit control.
Ports for plug-in loop detectors.
Automatic sequencing inputs for use with slide and swing gate operators.
Two convenience outlets.
360° gear box rotation.
Gate tracker reporting output.
Programming switches.
Built-in power On/Off switch.
Left or right hand mount.



SPECIFICATIONS Model 1602

1 HP continuous-duty motor.
115 VAC.
230 VAC.
460 VAC.
60:1 gear-box running in a continuous oil bath.
Arm rotates 90° in approximately 5.5 seconds.
Class III and IV applications.
Compliant with UL 325 and 991. ETL Listed.
(Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate opertator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
Dimensions (operator only): 15"W x 38"H* x 15"D.



OPTIONS AVAILABLE WITH THIS OPERATOR

DC powered convenience open.
20-foot three-piece wood arm - counter balanced.
Plug-in loop detectors.
Heater kit for cold environments.
Fan kit for hot humid environments.



Shipping: All gate operators are shipped by Motor Freight you must select the Motor Freight option when ordering gate operators.

Note: Model 1602 barrier operators are not designed for high-use commercial applications (gated communities, apartments applications, parking etc.). They are designed for industrial applications with a usage of 30 cycles per hour or less.